The customer called me in to resolve a problem in at a beautiful holiday cottage in Cockermouth which had an old Quarry tiled floor installed which she had tried to make shine but had ended up turning it pink in places
Cleaning Quarry Floor Tiles
On my arrival I spent time protecting the kitchen units and adjacent wooden floor and then started on removing the old sealer with Tile doctor Remove and Go; I sprayed it on working in small areas and working it into the tile with a brush making sure to scrub it in well, the resultant soiled solution was washed off with clean water the and then removed using a wet vacuum. After finishing with the tile I moved onto the grout joints using the same process to make sure they were all clean and then the floor was given a good rinse to neutralise the floor before sealing. Again a wet vacuum was used to remove any liquids from the floor and it was then left to dry fully overnight.
Sealing Quarry Floor Tiles
The next day I returned to the cottage and after verifying the floor was dry with a damp tester it was sealed with four coats of Tile Doctor Seal and Go which provides on-going protection as well as adding a nice shine to the tile.
This job took me two days and whilst I was there I took the time to explain how to maintain the floor going forward and the importance of using a Neutral Cleaner to extend the life of the sealer. Certainly the customer was very happy with the results and left the following message our feedback system:
“Absolutely delighted the tiles were very marked in places but Heidi has managed to get them off and the tiles are back to their true colour which I hoped they would be. Heidi explained step by step the procedure and I am very pleased with the result Thank you very much for the time spent and I would recommend Heidi — Veronica”